Rockwell Automation 1786-TPYS ControlNet Coax Taps Installation Instructions - Manual (Page 6)

6 ControlNet Coax Taps
Rockwell Automation Publication 1786-IN007C-EN-P - October 2010
Required Tools
You will need a #1 Phillips-head screwdriver for most types of installation.
Install the Coax Tap
Because the coax taps are designed to be versatile, several types of installation
are available. Choose to install the coax tap by using one of these mounting
methods:
• Mount to DIN Rail , see page 7
• Mount to Surface or Fixture , see page 10
• Mount Through Holes in Tap , see page 11
IMPORTANT For securing coax cables (including the tap cable), use
hook-and-loop wire straps (not included; local purchase). We do
not recommend wire ties because excessively tightened ties may
degrade cable transmission quality.
Hook-and-loop
wire strap