Rockwell Automation 1786-TPYS ControlNet Coax Taps Installation Instructions - Manual (Page 8)

8 ControlNet Coax Taps
Rockwell Automation Publication 1786-IN007C-EN-P - October 2010
4. Position the universal mounting bracket against the back of the tap or
the transition plate so the screw holes are aligned.
5. If you mount the tap by using the transition plate, insert the self-taping
screws into the holes of the universal mounting bracket and tighten.
20080
31642
20084
T-tap T-tap Transition Plate Used Y-tap