Rockwell Automation 1763-L16xxx MicroLogix 1100 Programmable Controllers Installation Instructions - Manual (Page 23)

23
Publication 1763-IN001B-EN-P - September 2007
Terminal Screw
Torque 0.56 Nm (5.0 in-lb) rated
Certifications UL Listed Industrial Control Equipment for use in Class 1, Division 2, Hazardous
Locations, Groups A, B, C, D
C-UL Listed Industrial Control Equipment for use in Canada
CE marked for all applicable directives
C-Tick marked for all applicable acts
Electrical/EMC The controller has passed testing at the following levels:
ESD Immunity EN 61000-4-2
4 kV contact, 8 kV air, 4 kV indirect
Radiated RF
Immunity EN 61000-4-3
10V/m, 26 to 1000 MHz (alternatively, 80 to 1000 MHz),
80% amplitude modulation, +900 MHz keyed carrier
Fast Transient
Immunity EN 61000-4-4
2 kV, 5 kHz
communications cable such as EtherNet, RS-232, and RS-485: 1 kV, 5 kHz
Surge Transient
Immunity EN 61000-4-5
Unshielded communications cable: 2 kV CM (common mode), 1 kV DM (differential
mode)
Shielded communications cable: 1 kV galvanic gun
I/O: 2 kV CM (common mode), 1 kV DM (differential mode)
ac Power Supply Input: 4 kV CM (common mode), 2 kV DM (differential mode)
dc Power Supply Input: 500V CM (common mode), 500V DM (differential mode)
ac/dc Auxiliary Output: 500V CM (common mode), 500V DM (differential mode)
Conducted RF
Immunity EN 61000-4-6
10V, 150 kHz...80 MHz
Conducted
Emissions EN 55011
ac Power Supply Input: 150 kHz...30 MHz
Radiated
Emissions EN 55011
30...1000 MHz
Line Related Tests EN 61000-4-11
ac Power Supply Input:
voltage drop: -30% for 10 ms, -60% for 100 ms
voltage interrupt: at voltage greater than -95% for 5 secs.
voltage fluctuation: +10% for 15 minutes, -10% for 15 minutes
dc Power Supply Input:
voltage fluctuation: +20% for 15 minutes, -20% for 15 minutes
General Specifications
Description 1763-
L16AWA L16BWA L16BBB L16DWD