Wire the controller for analog input, Wire the controller for analog output – Rockwell Automation 1758-RTU202 Datasite Installation Instructions User Manual
Page 10
                                    Advertising
                                    
                                        
                                    
                                
                                 
10 DataSite Natural Gas Flow Meter and Remote Terminal Unit
Publication 1758-IN001C-EN-P - June 2011
Wire the Controller for Analog Input
The analog input circuits are equipped with overvoltage and overcurrent protection.
Wire the Controller for Analog Output
Analog Output wiring
WARNING
Refer to Power Source Requirements for details on wiring.
WARNING
Refer to Power Source Requirements for details on wiring.
4
5
AI0
Two wire 
sensor
24VDC
Three 
wire 
sensor
Power Supply
AI1
6
7
AI2 AI3
8
AI4
9
10
AI5
V-
44381
LOAD
LOAD
12~24V
AOV-
45
AO1
44
AOV-
43
AO0
42
AOV-
41
AOV+
40
44382
                                    Advertising
                    
                        
                    
                            
                            
                    This manual is related to the following products: