Rockwell Automation 1758-RTU202 Datasite Installation Instructions - Manual (Page 20)

20 DataSite Natural Gas Flow Meter and Remote Terminal Unit
Publication 1758-IN001C-EN-P - June 2011
Status Indicators
Indicator State Description
PWR Green Power is applied. This indicator is not affected by LED power
control settings.
RUN Green Normal operation. This indicator is not affected by LED power
control settings.
STAT Flashing red ISaGRAF application running
ERR Yellow Error detected
DI0…DI7 Green Corresponding digital input is on
DO0…DO3 Green Corresponding digital output is on
PI0…PI2 Green Corresponding pulse input voltage is more than 8V
TX0 Flashing red Transmitting data through HART port
RX0 Flashing green Receiving data through HART port
TX1 Flashing red Transmitting data through serial port 1
RX1 Flashing green Receiving data through serial port 1
TX2 Flashing red Transmitting data through serial port 2
RX2 Flashing green Receiving data through serial port 2
LINK Flashing yellow Transmitting or receiving data through Ethernet port
Yellow Controller is connected to Ethernet network
10\100M Red Speed for ethernet connection, 10\100 Mbps
F\H Green Ethernet mode, half duplex or full duplex
PWR STAT DO0 DO2 DI0 DI2 DI4 DI6 PI0 PI2 TX0 TX1 TX2 10\100M
RUN ERR DO1 DO3 DI1 DI3 DI5 DI7 PI1 LINK RX0 RX1 RX2 F\H