Rockwell Automation 2706-P92C_P94C InView Message Display - Manual (Page 6)

6 InView Marquee Message Display
Publication 2706-IN016D-EN-P - February 2009
Mount the 2706-P92C and 2706-P94C Displays
1. Attach the two sign brackets to a wall, ceiling, or other surface.
Be sure to place the brackets so the bracket flanges face appropriately as
shown below. Mount the brackets the following distance apart (measured
from the center of the mounting holes in each bracket):
2. Mount the sign on the sign brackets using the hex bolts supplied. Insert the
bolts into the far single holes first, until the desired viewing angle is
determined.
IMPORTANT
Do not install the sign directly to drywall or plasterboard. The sign must be fastened to a
surface capable of supporting at least four times the weight of the sign.
Mounted so flanges are hidden
behind the sign.
2706-P92C:103.0 cm (40.55 in.)
2706-P94C: 194.4 cm (76.55 in.) Mounted so flanges show on the
sides of the sign.
2706-P92C: 107.8 cm (43.22 in.)
2706-P94C: 201.2 cm (79.22 in.)
Sign brackets, facing out from the sign
Sign brackets, facing in behind the sign
Wall or
ceiling
.40
5.40
.88
1.75 1.75
1.33
.344 x .688
OB ROUND
0.572
Ø.281
10°
7.635
Left Bracket
.344 x .688
OB ROUND
4.63
1.50
1.50
.76
.40
1.33
.135
0.572
10°
.40
5.40
.88
1.75 1.75
1.33
.344 x .688
OB ROUND
0.572
Ø.281
10°
7.635
Right Bracket
.344 x .688
OB ROUND
4.63
1.50
1.50
.76
.40
1.33
.135
0.572
10°
Wall
Hex Bolt
for Single
Hole
Ceiling