Rockwell Automation 2706-P92C_P94C InView Message Display - Manual (Page 9)

InView Marquee Message Display 9
Publication 2706-IN016D-EN-P - February 2009
3. Strip the electrical wires back 1/4”. Insert the wires into the appropriate
terminal connection and tighten the screw to 0.79 N•m (7 lb•in). The
terminal block is UL rated for wire ranges of 14 to 8 AWG.
4. Remove the necessary hole plugs before connecting the communications
cables.
Front View
Sign Case,
inside
Conduit
Connector,
Outside End
Connector nut, with teeth
facing the sign case.
Rubber Gasket
Power connection
LINE 1 GROUND LINE 2 OR NEUTRAL
LINE 1 GROUND LINE 2 OR NEUTRAL
208 - 240 VAC INPUT
Neutral
(Line 2):
WHITE
Line
(Hot)
BLACK
Ground
GREEN
w/
Yellow