Rockwell Automation 2711PC-T10C4D1 PanelView Plus Terminals and Display Modules - Manual (Page 9)

PanelView Plus 700 to 1500 and PanelView Plus Compact 1000 Terminals and Display Modules 9
Publication 2711P-IN001I-EN-P - November 2009
Modular Components
If the modules are ordered separately, attach the logic and communication module to the
display module before panel installation. See the instructions shipped with each module.
The logic module for the terminals is available with or without RAM and CompactFlash
preinstalled. If memory is ordered separately, you must install the memory before attaching
the logic module to the display module. See the instructions shipped with the logic module.
About the PanelView Plus Compact 1000 Terminal
The PanelView Plus Compact 1000 terminal has a fixed configuration. It does not support
communication modules, or the replacement of the logic module. The 1000 terminal contains
a non-isolated DC power supply.
The PanelView Plus Compact 1000 terminal has these features:
•
1000 touch screen display module
•
USB ports (2)
•
RS-232 serial port
•
10/100Base T Ethernet port
•
Power input, 24V DC non-isolated
•
CompactFlash Type 1 card slot
Communication Module
Logic Module
Display Module
Power Input, AC or DC
Ethernet Port
Serial Port USB Ports CompactFlash Card Slot
USB Ports RS-232 Serial Port
Ethernet Port
Power Input, 24V DC Compact Flash