Rockwell Automation 2711 PanelView 1400 Terminals Installation Instructions - Manual (Page 12)

PanelView 1400 Terminals 11
Connecting AC Power
The electrical rating for the PanelView 1400 terminal is shown below.
Terminal Type Supply Voltage Power Consumption
PV1400
85 to 264V ac,
47 to 63 Hz
200 VA maximum
The PanelView 1400 terminal is an IEC 1131-2 Equipment Class I device and
requires you to connect the (Protective Earth) terminal to an earth conductor.
!
ATTENTION: The PanelView 1400 terminal is designed for
safe use when installed in a suitably rated NEMA Type 12, 13, 4X
(indoor use only), IP54 or IP65 enclosure.
!
ATTENTION : Do not apply power to the terminal until all
wiring connections have been made. Failure to do so may result in
electrical shock.