Rockwell Automation 2711 PanelView 1400 Terminals Installation Instructions - Manual (Page 13)

PanelView 1400 Terminals 12
To connect AC power to the PanelView 1400 terminal:
1. Secure the AC power wires to the L1 and L2N screws on the terminal block.
2. Secure the Earth Ground/Protective Earth wire to the screw on the terminal
block.
!
ATTENTION: Improper wiring of the power terminals may result
in voltage at the communication connector shells. Refer to Figure 7
when wiring.
3. Apply power to the terminal.
Figure 7
AC Power Connections
120/240V ac, 3 Wire,
European Harmonized
Color Code
Screwdriver slot
120/240V ac, 3 Wire,
U.S. Color Code
White
(Neutral)
Black
(Line)
Green
(Earth Ground)
L1/L
L2/N
L1/L
L2/N
Green/Yellow
(Protective Earth)
Blue
(Neutral)
Brown
(Line)