Rockwell Automation 2711 PanelView 1400 Terminals Installation Instructions - Manual (Page 7)

PanelView 1400 Terminals 6
Cutout Dimensions
Use the full size templates shipped with the terminal to mark the cutout
dimensions. Figure 4 shows reduced size cutouts.
Figure 4
PanelView 1400 Cutout Dimensions
7/32 in. (5.56 mm) Typical
18 Holes
38 mm
(1.50 in.) 305 mm
(12.0 in.)
170 mm
(6.70 in.)
221 mm
(8.70 in.)
110 mm
(4.35 in.)
419 mm
(16.50 in.)
140 mm
(5.50 in.)
233 mm
(9.16 in.)
PV1400 Keypad Terminals
Ignore stud
holes if mount-
ing terminal us-
ing panel clips.
391 mm
(15.40 in.)
127 mm
(5.0 in.)
140 mm
(5.50 in.)
212 mm
(8.35 in.)
169 mm
(6.65 in.)
Ignore stud
holes if mount-
ing terminal us-
ing panel clips.
PV1400 Touch Terminals
305 mm
(12.0 in.)
7/32 in. (5.56 mm) Typical
12 Holes