Rockwell Automation 2707-L8PxX, -L40PxX, -V40PxX DTAM Plus Operator Interface Installation Instructions - Manual (Page 13)

13
To connect a DTAM Plus RS-232 port to a computer, use the RS-232
Upload/Download cable (Catalog No. 2707-NC2). Use the
communications or printer port (see below). You may need a 9-to-25
pin adapter to connect the cable to your computer. A male to female
gender adapter is required to connect the cable to the printer port or
you can create your own cable. Appendix B of the DTAM Plus User
Manual (2707-UM001B–EN–P).
Gender
Adapter
Gender
Adapter
Remote I/O Version With
Printer Port
Remote I/O Connector
(Terminal Block)
Printer Port RS-232 Connector
(9 Pin Male)
Power Connector
Comm Port Connector
(9 Pin Female)
Remote I/O Connector
(Terminal Block)
Power Connector
Remote I/O Version With
Comm Port
To Computer
RS-232 Port
Versions with a Comm Port Only Versions with a Comm Port
and Printer Port
Printer Port RS-232 Connector
(9 Pin Male)
Comm Port Connector
(9 Pin Female)
Comm Port Connector
(9 Pin Female)
Power Connector Power Connector
To Computer
RS-232 Port
To Computer
RS-232 Port
Use Either Port
(Set DIP Switch #6 to
correspond)
To Computer
RS-232 Port
Cable
(2707-NC2)
Cable
(2707-NC2)
Comm 1 or 2
Comm 1 or 2
Comm 1 or 2
Cable
(2707-NC2)
Cable
(2707-NC2)
Comm 1 or 2
Cable
(2707-NC2)
Upload / Download
RS-232 Connections