Rockwell Automation 2707-L8PxX, -L40PxX, -V40PxX DTAM Plus Operator Interface Installation Instructions - Manual (Page 19)

19
If this product is installed within the European Union or EFTA
regions, the following regulations apply:
This apparatus is tested to meet Council Directive 89/336
Electromagnetic Compatibility (EMC) standards:
•
EN50081–2 Class A (Industrial) Emissions
•
EN50082–2 Class A (Industrial) Immunity
•
EN61000–6–2 Class A (Industrial) Immunity (Series D Only;
2707–L8P1, –L40P1, –V40P1: Series C Only; 2707–L8P2,
–L40P2, –V40P2, V40P2N)
According to these Standards, the factor which determines, for EMC
pruposes, whether an apparatus is deemed to be “Industrial” or
“Residential, commercial and light industrial”, is given in Clause 1
of EN50081–2 as follows:
Apparatus covered by this standard is not intended for
connection to a public mains network, but is intended to be
connected to a power network supplied from a high– or
medium–voltage transformer dedicated for the supply of an
installation feeding a manufacturing or similar plant.
The product described in this document is intended solely for use in
an industrial environment as defined above. When installed in
Europe, any other application is in contravention of the European
Union Directives, and a breach of those laws.
European Union Directive
Compliance