Rockwell Automation 6186-Mxxx Industrial Monitors Installation Instructions - Manual (Page 22)

22 Industrial Monitors
Publication 6186M-IN001L-EN-P - July 2008
Connect AC Power
With the AC power adapter, the monitor can use a single-phase AC power supply,
providing 90…264V AC at 47…63 Hz.
Power must be available at a grounded outlet nearby. Whenever possible, connect
the monitor to the same AC source that supplies the computer.
Follow these steps to connect power to the monitor.
1. Turn off the main power switch or breaker.
2. Connect the external power-supply cable to the 12V DC power input
connector on the monitor and secure this connection by screwing the barrel
over the threads.
3. Connect the power cord to the main power supply.
4. Restore AC power.
WARNING
Hazardous Location Installation
Secure the AC power cord in the adapter by the metal cage.