Rockwell Automation 6186-Mxxx Industrial Monitors Installation Instructions - Manual (Page 24)

24 Industrial Monitors
Publication 6186M-IN001L-EN-P - July 2008
Secure the Cables
Secure cables to the three cable restraints on the monitor using the supplied cable
ties. Securing the cables provides strain relief on the cables and avoids loose,
hanging cables.
Backlight Assembly Disposal
Ship or Transport Product
If you need to ship the product via common carrier or transport it to another
location, you must first uninstall the product and place it in its original packing
material.
ATTENTION
The backlight assembly in this unit contains mercury. At the end of its life, this
equipment should be collected separately from any unsorted municipal waste.
ATTENTION
Do not ship or transport the product when it is installed in a machine, panel, or
rack. Doing so may cause damage to the product. You must uninstall the
product and place in its original packing material before shipping. Rockwell
Automation is not responsible for damage incurred to a product that is shipped
or transported while installed in a machine, panel, or rack.
Run cables along the side of each cable restraint.
Cable Restraints
Insert cable ties around cables and
through cable restraints to secure cables.