Rockwell Automation 2705 RediSTATION Operator Interface User Manual - Manual (Page 40)

Publication 2705-UM001A-EN-P
5-4 Building a Custom RediSTATION
Every 2 consecutive pins on the I/O connector connects to an I/O
cable connector. The I/O connector supports 2 outputs/4 inputs.
To simplify wiring, input devices and output devices attach to
opposite ends of the I/O connector. The following table defines pin
functions on the I/O connector. Output devices connect to pin 1-2
and 3-4. Input devices connect to pins 5-6, 7-8, 9-10 and 11-12.
Unused pins are left open.
I/O Connector Pin # Pin Label Function
1 OUT1+ Connects Output Device
2 OUT1-
3 OUT2+ Connects Output Device
4 OUT2-
5 IN4+ Connects Input Device
6 IN4-
7 IN3+ Connects Input Device
8 IN3-
9 IN2+ Connects Input Device
10 IN2-
11 IN1+ Connects Input Device
12 IN1-
I/O Cable (up to 6) I/O Connector
To Output (Pilot Light)
To Output (Pilot Light)
To Input (Contact)
To Input (Contact)
To Input (Contact)
To Input (Contact)
Circuit
Board