Rockwell Automation 2705 RediSTATION Operator Interface User Manual User Manual
Page 59
Publication 2705-UM001A-EN-P
User Configuration C-5
To simplify wiring, input devices and output devices attach to
opposite ends of the I/O connector. The following table defines pin
functions on the I/O connector. Output devices connect to pins 1-2
and 3-4. Input devices connect to pins 5-6, 7-8, 9-10 and 11-12.
Unused pins are left open.
2. Mount the circuit board using the spacers and mounting screws
provided. Tighten circuit board mounting screws to 14 in–lbs.
3. Attach the 6 DeviceNet cable leads to the DeviceNet removable
terminal block connector.
Page 1-7 provides a description of the DeviceNet connections.
I/O Connector Pin #
Pin Label
Function
1
OUT1+
Connects Output Device
2
OUT1-
3
OUT2+
Connects Output Device
4
OUT2-
5
IN4+
Connects Input Device
6
IN4-
7
IN3+
Connects Input Device
8
IN3-
9
IN2+
Connects Input Device
10
IN2-
11
IN1+
Connects Input Device
12
IN1-
Removable Terminal
Block Connector
Pin 1
Pin 6
Common
CAN Low
Shield
CAN High
VDC+
E GND