Rockwell Automation 57C409 2 Channel Analog Input Module - Manual (Page 35)

CĆ1
Appendix C
Field Connections
ăăConn.
ăăPin No.
ăăăăă1 +10 Volts Channel 0ăă
ăăăăă2 +1 Volt Channel 0
ă
ăăăăă3 common
ăăăăă4 +10 Volts Channel 1
ăăăăă5 +1 Volt Channel 1
ăăăăă6 common
ăăăăă7 no connection
ăăăăă8 +15 Volts isolated
ăăăăă9 common
ăăăă10 -15 Volts isolated
(1)
(2)
(1)
(2)
Function
Note: 1 This input may be modified to accept +5 volts by connecting a
22.1K ohm resistor between terminals 1 & 2 or 4 & 5.
Note: 2 This input may be modified to accept a +20 ma current signal by
connecting 51 ohm resistor between terminals 2 & 3 or 5 & 6.