Rockwell Automation 57C409 2 Channel Analog Input Module - Manual (Page 41)

EĆ3
Sample Configuration Task
The following is an example of a configuration task for the input module:
1000 !
1001 !
1002 !
1003 ! analog inputs
1004 !
1005 IODEF ANALOG INPUT 0%[SLOT=4, REGISTER=0]
1006 IODEF ANALOG INPUT 1%[SLOT=4, REGISTER=1]
1010 !
1011 ! common clock enable
1012 !
1015 IODEF CCLK ENABLE 0@[SLOT=4, REGISTER=5, BIT=6]
1020 !
1021 ! A/D update period
1022 !
1025 IODEF UPDATE TIME 0%[SLOT=4, REGISTER=7]
1026 IODEF UPDATE TIME 1%[SLOT=4, REGISTER=8]
1030 !
1031 ! input filters
1032 !
1035 IODEF INPUT 0 FILTER%[SLOT=4, REGISTER=9]
1036 IODEF INPUT 1 FILTER%[SLOT=4, REGISTER=10]
1050 !
1051 ! Place any additional configuration statements here
1052 !
2000 END
Sample Configuration Task Defining Interrupts
The following is an example of a configuration task for an input module defining
interrupts:
1000 !
1001 ! analog inputs
1002 !
1005 IODEF ANALOG INPUT 0%[SLOT=4, REGISTER=0]
1006 IODEF ANALOG INPUT 1%[SLOT=4, REGISTER=1]
1010 !
1011 ! interrupt status & control registers (used by the operating sys.)
1012 !
1015 IODEF ISCR CHANNEL 0%[SLOT=4, REGISTER=5]
1016 IODEF ISCR CHANNEL 1%[SLOT=4, REGISTER=6]
1020 !
1021 ! common clock enable
1022 !
1025 IODEF CCLK ENABLE 0@[SLOT=4, REGISTER=5, BIT=6]
1030 !
1031 ! A/D update periods
1032 !
1035 IODEF UPDATE TIME 0%[SLOT=4, REGISTER=7]
1036 IODEF UPDATE TIME 1%[SLOT=4, REGISTER=8]
1040 !
1041 ! input filters
1042 !
1045 IODEF INPUT 0 FILTER%[SLOT=4, REGISTER=9]
1046 IODEF INPUT 1 FILTER%[SLOT=4, REGISTER=10]
1050 !
1051 ! Place any additional configuration statements here
1052 !
2000 END
This sample configuration defines all of the information most commonly used on
the module. Omit from your program any definitions you do not need to use.