Rockwell Automation 57C442 Data Highway Plus Interface Module - Manual (Page 9)

1-3
1.2 Related Hardware and Software
M/N 57C442 contains one Data Highway Plus Interface module. The
module can be used with the following hardware and software:
1. M/N 57C430A, 57C431, 57C435 Automax Processor.
2. IBM -AT compatible computer running DOS version 3.1 or later.
3. M/N 61C127 RS-232C ReSource Interface cable. This cable is
used to connect the personal computer to the AutoMax Processor
module.
4. M/N 57C413 or 57C423 Common Memory module. This module is
used when there is more than one AutoMax Processor in a rack.
5. (various model numbers) ReSource AutoMax Programming
Executive software.
6. A-B Data Highway Plus cabling hardware.
The thick black bar shown on the right-hand margin of this page will be
used throughout this instruction manual to signify new or revised text or
figures.