Rockwell Automation 57C600 AutoMax Programming Exec V3.8 (+ Regulators) Install - Manual (Page 2)

E1998 Rockwell International Corporation.
Nortont is a trademark of Peter Norton Computing.
VAXt and VAX/VMSt are trademarks of Digital Equipment Corporation.
IBMt and OS/2 are trademarks of International Business Machines Corporation.
Microsoft, Windows, and MSĆDOS are trademarks of Microsoft Corporation.
AutoMaxt and ReSource are registered trademarks of Reliance Electric Company
or its subsidiaries.
The information in this user's manual is subject to change without notice.
WARNING
ONLY QUALIFIED ELECTRICAL PERSONNEL WHO ARE FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF ALL EQUIPMENT IN THE SYSTEM AND
THE HAZARDS INVOLVED SHOULD INSTALL, ADJUST, OPERATE, AND/OR
SERVICE THIS EQUIPMENT. READ AND UNDERSTAND ALL APPLICABLE
MANUALS IN THEIR ENTIRETY BEFORE PROCEEDING. FAILURE TO OBSERVE
THIS PRECAUTION COULD RESULT IN BODILY INJURY.
WARNING
THE USER MUST PROVIDE AN EXTERNAL, HARDWIRED EMERGENCY STOP
CIRCUIT OUTSIDE THE PROGRAMMABLE CONTROLLER CIRCUITRY. THIS
CIRCUIT MUST DISABLE THE SYSTEM IN CASE OF IMPROPER OPERATION.
UNCONTROLLED MACHINE OPERATION MAY RESULT IF THIS PROCEDURE IS
NOT FOLLOWED. FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN
BODILY INJURY.