Rockwell Automation 8510 AC Spindle Drive System Programming Manual - Manual (Page 6)

Introduction
Chapter 1
1-3
Display Description The 8510 display which is used for programming, as well as status and
diagnostic messages consists of a 16 character, 2 line, LCD (Liquid
Crystal) display. The display is divided into several different sections as
shown in Figure 1.1.
Figure 1.1
LCD Display
Gear Range
Selected by Digital
Inputs
Motor Winding
Selected by Digital
Inputs
Menu Level
Indicator
Menu Information
Gear Range
Selected for
Programming
(when applicable)
Motor Winding
Selected for Program-
ming
(when applicable)
Menu Level
Indicator (when
applicable)
Menu Information
Line 1, Character 1
Line 2, Character 1
Line 1, characters 1 & 2 – are used to display the gear range and motor
winding data set that is currently selected by the digital inputs and is being
used for drive operation. Character 1 will show the selected gear range
(1-4) and if a 2 speed motor is used, character 2 will show the motor
winding (H = high speed winding, L = low speed winding).
Line 1, character 3 – is a variable length bar (moving from the bottom up)
that represents the current depth (level) in the menu system.
Line 1, characters 4-16 – are used to display the name of the current menu
level or selected parameter. The menu options or parameter value
associated with the item displayed on line 1 will be displayed on line 2.
Line 2, characters 1 & 2 – are used to display the gear range and motor
winding data set that is currently selected for programming. Character 1
will show the selected gear range (1-4) and with 2 speed motors, character
2 will show the motor winding (L or H).
Line 2, character 3 – a variable length bar (moving from the bottom up)
that represents the current depth (level) in the menu system that has been
selected. For each level the user moves down, another bar is added to the
display.
Line 2, characters 4-16 – used to display the options that are available at
the current menu level or the value of the parameter that has been selected.