Prevent electrostatic discharge, Set the node address – Rockwell Automation 1799-D12G12GL 12 Input/12 Output Discrete Embedded I/O User Manual
Page 5
5
12 Input/12 Output Discrete Embedded TTL I/O Module with Pulse Width Modulation and DeviceLogix
Publication 1799-IN008A-EN-P - July 2005
Set the Node Address
Set the node address using the rotary switches or a DeviceNet software
configuration tool such as RSNetWorx for DeviceNet.
The two switches are S1 and S2:
Use the following illustration to help you locate the switches.
ATTENTION
Prevent Electrostatic Discharge
This equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Follow these
guidelines when you handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• If available, use a static-safe workstation.
• When not in use, store the equipment in appropriate
static-safe packaging.
Switch Label
Function
S1
MSD - Most Significant Digit
S2
LSD - Least Significant Digit
S1
S2
31572-M