Rockwell Automation 1799-D12G12GL 12 Input/12 Output Discrete Embedded I/O - Manual (Page 8)

8 12 Input/12 Output Discrete Embedded TTL I/O Module with Pulse Width Modulation and DeviceLogix
Publication 1799-IN008A-EN-P - July 2005
I/O Connector Pin Assignments
The following illustration depicts the pin number assignments of the I/O connectors
(P2 through P5).
I/O Connector Signals
The following table identifies the signal for each pin number on the I/O connectors
(P1 through P5).
TIP
If necessary to guard against excessive vibration, tighten the two
screws on the DeviceNet connector (P1) to a maximum torque of
0.79 N-m (7 in-lbs).
Pin Description Function Comments
1 Common Field Power 0V dc return Field power minus
2 First Input Input
3 First Output Output
4 5V dc Field Power +5V dc field 68 mA per connector
5 Second Output Output
6 PWM Signal Output Requires Enable Set
7 Second Input Input
8 Third Output Output
9 Third Input Input
10 Not Used Not Used Not Used
11 Not Used Not Used Not Used
12 Not Used Not Used Not Used
31572-M
1 2 3 4 5 6 7 8 9 10 11 12
Connectors P2 through P5