Rockwell Automation 1440-TBS-J XM Dynamic Measurement Module Terminal Base - Manual (Page 18)

18 XM Dynamic Measurement Module Terminal Base
Publication ICM-IN003D-EN-P - March 2013
Specifications
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial
Automation Wiring and Grounding Guidelines, publication
1770-4.1 .
XM Dynamic Measurement Terminal Base - 1440-TBS-J
Attribute Value
Enclosure Type Rating None (open-style)
Isolation Voltage Established by installed module
Voltage Ratings
XM Bus
Power Terminals
I/O Terminals 24V DC, 3 A max, Class 2/SELV/PELV
24V DC, 3 A, Class 2/SELV/PELV
24V DC, 60 mA, Class 2/SELV/PELV
Wire Size 0.34... 2.1 mm 2 (22...14 AWG) solid or
stranded copper wire rated at 75 °C
(167 °F) or greater, 1.2 mm (3/64 in.)
insulation max, recommended strip length
8 mm (0.31 in.)
Wiring Category
(1) Established by installed module
North American Temp Code T5
IEC Temp Code T4
Environmental Specifications
Attribute Value
Operating temperature
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal
Shock): -20…70 °C (-4…158 °F)
Temperature, surrounding air, max 70 °C (158 °F)