Rockwell Automation T6050 SurgeGard Incipient Surge-Conditioning Module - Manual (Page 11)

T6050 Operations & Maintenance Guide Chapter 1 – Introduction
Chapter 1 - Introduction
This document applies to the T6050 SurgeGard™ which is an incipient surge-conditioning module
designed to continuously monitor the frequency flow, pressure or current oscillations occurring
before the compressor reaches the actual surge point(s). SurgeGard™ is patented and has been
successfully used in many compressor control systems
About This Manual
As its name implies, this manual is a guide to understanding and installing the T6050 hardware.
Since this document is relatively small, an index is not included. Instead, a detailed table of contents
is provided. This manual contains the following chapters:
•
Chapter 1 - Introduction
This chapter contains information about this document and related reference documents.
•
Chapter 2 - Product Overview
This chapter presents an overview of the product as a whole.
•
Chapter 3 - Hardware Descriptions
This chapter describes all of the hardware which comprises the T6050.
•
Chapter 4 - Installation
This chapter explains how to install a T6050, including mounting and wiring.
•
Chapter 5 - Specifications
This chapter provides general specification.
This document will be useful to anyone who is responsible for design, installation, and maintenance
of a control system that contains a T6100, T6200 or T6300 Compressor Controller. Information
presented here will enable knowledgeable persons to perform those tasks that are required for
successful installation and maintenance of the T6050.