Rockwell Automation T6050 SurgeGard Incipient Surge-Conditioning Module - Manual (Page 4)

ICS Triplex Turbo Machinery Control
4
Warnings!
READ THIS ENTIRE MANUAL AND ALL RELATED PUBLICATIONS PERTAINING TO
THE WORK TO BE PERFORMED BEFORE INSTALLING, OPERATING, OR
SERVICING THIS EQUIPMENT.
•
Practice all plant and safety codes and standards. Failure to follow instructions can result
in personal injury and/or property damage.
•
To prevent ignition of hazardous atmospheres, do not remove covers of Class I Division I
(explosion-proof) units with power applied.
•
Qualified technicians should perform all servicing. Dangerous voltages may be present on the
circuit boards.
•
Use extreme caution when working around power-input cables. These cables may have
potentially lethal voltages on them.
•
Be very careful when working on the digital (or discrete) input/output field termination panels.
The external devices being controlled can have high, potentially lethal voltages on them. Turn
off the power to the external devices before disconnecting or connecting the cable or a wire
between the digital (or discrete) input/output field termination panels and the field wiring.
•
Replace fuses only with specified parts for continued safe operation.
•
Equip the engine, turbine, or other type of prime mover with an over speed (over temperature or
over pressure, where applicable) shutdown device that operates totally independently of the
prime mover control device. This protects against run-away or damage to the engine, turbine, or
other prime mover, or personal injury or loss of life, should the mechanical-hydraulic or
electronic governor, actuator, fuel control, driving mechanism, linkage, or controlled device fail.
•
Make sure the charging device is turned off before disconnecting the battery from the system to
prevent damage to a control system that uses an alternator or battery-charging device.
•
Prior to energizing the equipment, have qualified personnel verify all wiring and connections
against vendor drawings. Incorrect wiring and/or connections can result in equipment damage.
•
Contact appropriate manufacturer for instructions on operation of engine, turbine, or driven unit.
This manual does not contain this information.
If you have questions or need more information on installing and operating ICS Triplex
equipment, contact ICS Triplex.