Rockwell Automation T6050 SurgeGard Incipient Surge-Conditioning Module - Manual (Page 15)

T6050 Hardware & Installation Guide Chapter 3 – Hardware Descriptions
PD-6050 Dec 04 5
Chapter 3 – Hardware Descriptions
Enclosure
The T6050 electronic component housing enclosure is designed to be mounted on both 32 and 35 mm
width standard DIN/EN rail and is completely self-contained. The electronic component housing
enclosure is manufactured of green KRILEN 6.6 Polyamide insulating material.
Circuit Board
All circuitry, including dc-to-dc converter power supply, is contained on a single circuit board. All
electrical parts are mounted on a rigid 1/16” thick fiberglass circuit board.
Terminations
All wiring to and from the T6050 is connected to the integrated terminal blocks on the component
housing enclosure. The terminal blocks have a KRILEN 6.6 polyamide insulating body, nickel-
plated copper alloy connectors, and pressure screws. The pressure screws are captive and secured
against self-loosening.