Rockwell Automation FactoryTalk Historian SE 3.0 Live Data Interface User Guide - Manual (Page 19)

3
●
Configuring FactoryTalk Historian Live Data Interface
●
●
●
●
●
13
If you configure an interface in the ICU, the batch file of the interface
(FTLDInt.bat) will be maintained by the ICU, and all configuration
changes will be kept in that file.
To configure an FTLD Interface with the ICU:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE > Interface Configuration Utility. The Interface
Configuration Utility dialog box appears.
2. From the menu bar, select Interface > New Windows Interface
Instance from BAT File. The Open Interface Configuration File
dialog box appears.
3. Navigate to C:\Program Files\Rockwell Software\FactoryTalk
Historian\Server\PIPC\Interfaces\LDInterface.
4. Select the FTLDInt_FTLD.bat.bak file and click Open.
5. Click OK in the Interface Configuration Utility message box to
acknowledge the information on duplicated point sources and ID
combinations.