Rockwell Automation FactoryTalk Historian SE 3.0 Live Data Interface User Guide - Manual (Page 43)

Chapter 8
37
Startup Command File
In Windows, command file names have a .bat extension. The Windows
continuation character (^) allows for the use of multiple lines for the startup
command. The maximum length of each line is 1024 characters (1
kilobyte). The number of parameters is unlimited, and the maximum length
of each parameter is 1024 characters.
Command-line parameters should begin with a “/” character. For example,
/ps=M.
The Interface Configuration Utility (ICU) provides a tool for configuring
the FTLD Interface startup command file.
Command-line Parameters
The table below lists command-line parameters and their descriptions.
We recommend that you always use the Interface Configuration Utility to
modify the startup file. If you manually change the startup file and then open it
using the Interface Configuration Utility, the utility will rewrite all the startup
parameters in the file.