Rockwell Automation FactoryTalk Historian SE 3.0 Live Data Interface User Guide - Manual (Page 38)

●
●
●
●
●
FactoryTalk Historian Live Data Interface User Guide
32
To access the I/ORates tag data in ICU, select IO Rate from the left pane
of the ICU dialog box.
ICU currently allows for one I/ORates tag to be configured for each copy
of the interface that is in use. Some interfaces allow for multiple I/ORates
tags.
The Input IORates Tag section contains the following elements:
Enable IORates for
this interface Select the check box to enable I/ORates for the selected interface.
Clear the check box to disable I/ORates for the selected interface.
Create Click it to create the suggested I/ORates tag with the tag name
indicated in the Tagname text box.
Delete Click it to delete the I/ORates tag listed in the Tagname text box.
Reset Click it to reset the I/ORates Event Counter and Tag settings.
Rename Click it to change the name of the I/ORates tag using the Rename
IORates Tag dialog box.
Add to File Click it to add the tag to the IORates.dat file with the event counter
listed in the Event Counter text box.
Event Counter The Event Counter correlates a tag specified in the iorates.dat file
with this copy of the interface. The command-line equivalent is /ec=x ,
where x is the same number that is assigned to a tag name in the
iorates.dat file.