Rockwell Automation FactoryTalk Historian SE 3.0 Live Data Interface User Guide - Manual (Page 58)

●
●
●
●
●
FactoryTalk Historian Live Data Interface User Guide
52
Severity Message text
Warning PI point <%s> is refused because of the invalid attribute of
InstrumentTag.
Warning PI point <%s> is refused because of the invalid attribute of Location
[4].
Warning The value quality of PI point <%s (PointID: %d)> with FactoryTalk
Live Data item <%s> is bad.
Warning Failed to convert PIEvent to FTLD variant type of data.
Warning Failed to write value to FactoryTalk Live Data item <%s>.
Warning Monitor disconnected from FactoryTalk service.
Warning Monitor reconnected to FactoryTalk service successfully.
Warning The value quality of PI point <%s (PointID: %d)> with FactoryTalk
Live Data item <%s> is bad because the FTLD service doesn't
response in %d ms.
Information PI point <%s> has been removed from the FTLD interface
(InterfaceID: %d).
Information PI point <%s> is edited in the FTLD interface (InterfaceID: %d).
Information PI point <%s> has been added to the FTLD interface (InterfaceID:
%d).
Information Connected to FactoryTalk Directory scope %s successfully.
Information FTLD interface(ID:%d) has Scan Class %d = %s.
Information Disconnected from FactoryTalk Directory %s successfully.
System Errors and PI Errors
System errors are associated with positive error numbers. Errors related to
PI are associated with negative error numbers.