Rockwell Automation FactoryTalk Historian SE 3.0 Live Data Interface User Guide - Manual (Page 56)

●
●
●
●
●
FactoryTalk Historian Live Data Interface User Guide
50
3. On the tool bar, click .
4. Wait, until the status on the status bar at the bottom of the dialog box
changes to Running.
To stop the FTLD interface:
In the ICU, click on the tool bar. The service status on the status bar
changes to Stopped.
You may additionally check the status of the service in the Administrative
Tools (page 50) program of Control Panel.
Using the Administrative Tools
To start the FTLD interface:
1. Click Start > All Programs > Administrative Tools > Services. The
Services dialog box appears.
2. Right-click FTLD<X> (where X is the interface number) and select
Start.
3. Wait until the status of the service changes to Started.
To stop the FTLD interface:
In the Services dialog box, right-click FTLD<X> and select Stop.