Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual

Page 33

Advertising
background image

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014

33

Configure the HART Device in RSLogix 5000 Programming Software

Chapter 2

6. Enable the HART function for each channel required.

7. Click OK.
8. Go Online and check the controller tags to verify operation.

Advertising
This manual is related to the following products:

1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual, 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual, 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual, 1756-IF16H E+H Instruments via HART to PlantPAx User Manual, 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual, 1756-IF8H E+H Instruments via HART to PlantPAx User Manual

Popular Brands
Popular manuals