Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 68)

68 Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
Chapter 5 Visualization
• Configure Ref_ChanData and Ref_ChanDiag to point to the appropriate
array channel position from the tags created in conjunction with
I_AB56IF8H.
Configure
P_AIn56H
Make the following modifications to the P_AIN56H Add-On Instruction.
• You must create the backing tag. Follow a system or naming convention for
your application to indicate the channel of the analog input module that it
is referencing.
• Configure Ref_DevInfo to point to the appropriate array channel position
from the tags created in conjunction withI_AB56IF8H.