Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in RSLogix 5000 Appli - Manual (Page 13)

Publication RA-UM002B-EN-P - November 2010
Developing an RSLogix 5000 Application 13
Creating User Programs
The RSLogix 5000 project originates from the MMCL_V200_20100501.acd
file. The following program and data folders are included in the project.
User Programs are called in the Periodic Task. This is to improve overall
system performance. To allow proper interaction between MMCL Add-On
instruction standard functions, when multiple period tasks are used, the
Period and Priority configuration for all tasks should be the same. If different
Period and Priority is configured, then customized code has to be added to
synchronize module scan in different tasks.
Periodic Task with all User Programs
Call all User Programs including. System Rungs
For example, User Program for Network Status
MMCL AOI Standard Functions called by User
All MMCL User Data Types (UDT)
All I/O modules listed here