Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in RSLogix 5000 Appli - Manual (Page 5)

5 Publication RA-UM002B-EN-P - November 2010
Preface
Introduction
This document describes how to create an application with RSLogix 5000
using the Mining, Mineral, and Cement Library (MMCL). It does not show
product installation or setup of the IT infrastructure.
Requirements
Before You Begin
The creation of an RSLogix application is based on the MMCL and the
following data files.
Item Requirements
Software • RSLogix 5000 version 17 or later
• Data Retrieval Tool Tag Import Files
(a) :
CLX_TAGS_OUT.csv
CLX_STRUCTURES_OUT.csv
(a) These files may be generated by the Data Retrieval Tool and created automatically by the MMCL
(MMCL_HDRS_DataTool_V132.mdb).
Library MMCL_V200_AOI_20100501.ACD or later
Hardware ControlLogix controller, 1756-L6x, firmware revision 17.xx
Skills Knowledge of communication networks and I/O modules
Item Requirements Description
Library MMCL_V200_AOI_20100501.ACD Basic application with Add-On
Instructions, provided in the MMCL
Data
Retrieval
Tool
CLX_TAGS_OUT.csv Option to automatically create module
tags, created in the Data Retrieval Tool
CLX_STRUCTURES_OUT.csv Option to automatically create Add-On
Instruction structures, created in the Data
Retrieval Tool