Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in RSLogix 5000 Appli - Manual (Page 9)

9 Publication RA-UM002B-EN-P - November 2010
Chapter
1
Developing an RSLogix 5000 Application
Creating a New Project
1. In RSLogix, open the MMCL_V200_AOI_YYYYMMDD.acd file
provided in the MMCL.
This application contains all Add-On Instructions.
2. Under File, select Save As.
3. Type your desired project name (for example,
UserProject_yyyy_mm_dd.acd) and click Save.
Configure Hardware I/O
Modules
All I/O modules used by the application are inserted and configured with the
I/O configuration tool.
1. Configure all hardware I/O modules located in the chassis.
For remote I/O modules (Networks), the adapters and required I/O
modules must be configured.
IMPORTANT
The I/O module Name must correspond to the Data Retrieval Tool tag designation (import file).
This is necessary for later export of I/O Module data and backup import to the Data Retrieval Tool
data base.
The backup import is used to store the proper hardware addresses, in the Data Retrieval Tool data
base.
For Tag names and Alias designations using Asset Code (AC), refer to
N_050817_HDRS_RSLogix_Concept.pdf.