Rockwell Automation 20D PowerFlex 700S and H Fan Inverter Upgrade Kit (Frame 9) - Manual (Page 15)

Rockwell Automation Publication PFLEX-IN015A-EN-P - March 2005 15
PowerFlex 700S and 700H Fan Inverter Upgrade Kit (Frame 9)
Step 8: Removing the
Connector Plate
Task Description
Remove the M5 Pozidrive screws, which secure the Connector Plate.
Proper tightening torque for reassembly is 4 N•m (35 lb•in).
Then lift and pull the plate away from the drive.
Remove all connectors and bus bars from the old Connector Plate.
Proper tightening torque for reassembly is 4 N•m (35 lb•in).
A
B
C
A B
C