Rockwell Automation 20D PowerFlex 700S and H Fan Inverter Upgrade Kit (Frame 9) - Manual (Page 18)

18 Rockwell Automation Publication PFLEX-IN015A-EN-P - March 2005
PowerFlex 700S and 700H Fan Inverter Upgrade Kit (Frame 9)
Step 11: Replacing the Motor
Capacitor
a
Task Description
Disconnect the wires from the old motor capacitor.
Remove the nut, which secures the capacitor to its bracket.
Remove the old capacitor and install the new one.
Install the new capacitor in reverse order of above steps.
IMPORTANT Before removing connections and wires, mark the connections and wires to
avoid incorrect wiring during assembly.
A
B
C
D
A
B
C
The mounting bracket for the capacitor will vary with revision
of drive. The most recent revision is shown.