Rockwell Automation 20D PowerFlex 700S and H Fan Inverter Upgrade Kit (Frame 9) - Manual (Page 21)

Rockwell Automation Publication PFLEX-IN015A-EN-P - March 2005 21
PowerFlex 700S and 700H Fan Inverter Upgrade Kit (Frame 9)
Step 13: Reassemble the
Drive Assemble the drive in reverse order of disassembly.
When reconnecting internal cables to the power terminal block, remember to
route incoming AC cables through the common mode inductors on the new
EMI Protection Plate.
If the cable for the fan on the new EMI Protection Plate does not reach the
connection point, rotate the fan 180 degrees.