Step 12: connecting the new components – Rockwell Automation 20D PowerFlex 700S and H Fan Inverter Upgrade Kit (Frame 9) User Manual
Page 19
Advertising
Rockwell Automation Publication PFLEX-IN015A-EN-P - March 2005
19
PowerFlex 700S and 700H Fan Inverter Upgrade Kit (Frame 9)
Step 12: Connecting the New
Components
Task
Description
Pre-install the new connector plate by laying it near its final position.
Connect the components as shown in
Figure 1
on page
20
.
A
B
Components from AC input drive shown.
Advertising
This manual is related to the following products: