Rockwell Automation 20D PowerFlex 700H/S Frame 13 Replacement Power Structures - Manual (Page 3)

PowerFlex® 700S and 700H Frame 13 Replacement Power Structures 3
Step 2: Removing the Old
Power Structure Before you can remove the old power structure from the drive, you must
remove the protective screens, protective covers and air flow plate from the
drive.
Removing the Protective Screens and Covers
1. For NEMA/UL Type 1 enclosures, remove the screws that secure the
protective screens to the enclosure and remove the screens.
2. Remove the four M5 POZIDRIV screws that secure each of the three
protective covers to the power structure and remove the protective
covers.
DC B US CONDUCT
ORS AND CAP
AC ITORS
OPERA TE A T HIGH VO LTA GE. REMO VE PO WER
AND W AIT 5 MINUTES BEFORE SER
VICING
DA NGER
!
1
Three covers
2