Rockwell Automation 20D PowerFlex 700H/S Frame 13 Replacement Power Structures - Manual (Page 5)

PowerFlex® 700S and 700H Frame 13 Replacement Power Structures 5
Important: Before removing connections and wires, mark the connections
and wires to avoid incorrect wiring during assembly.
5. Remove the motor wiring from the output power terminals on the power
structure.
6. Remove the ground connection from the lower right corner of the power
structure.
7. Remove the input connections from the incoming DC bus terminals at
the top of the power structure.
DC-
DC+
DC-
DC+
DC-
DC+
U/T1 V/T2 W/T3
U/T1 V/T2 W/T3
Output Power Terminals
DC Bus Terminals
ASIC Board
Assembly
Power Supply Voltage
Feedback Board Assembly
Ground Terminals