Rockwell Automation 1440-VST02-01RA XM-120 Eccentricity Module - Manual (Page 50)

Publication GMSI10-UM010C-EN-P - May 2010
42 Installing the XM-120 Eccentricity Module
9. Click Open to start the firmware update and click Yes to confirm. The
Configuration Tool begins the update and shows its progress in the
Progress dialog box.
10. When the update completes, the message "The module is configured
with the factory defaults. You need to download a configuration."
appears. Click OK.
11. Click OK again to return to the XM Serial Configuration Utility screen.
Notice that the XM Module icon displays XM-12E instead of XM-120.
12. You are now ready to configure the Eccentricity module. Click the
Configure button to display the Eccentricity parameters in the
Configuration Tool. Refer to Chapter 3 for a complete list of the
Eccentricity configuration parameters.
TIP
Review and edit the Eccentricity parameters as necessary.
When you are finished, download the parameters to the
module. The module will remain in Program mode until
you download a configuration.
TIP
For assistance on how to use the XM Serial Configuration
Utility, refer to the online help.