AJA LUT-box - Manual (Page 13)

LUT-box Mini-Converter v2.1r1 www.aja.com 13
Figure 11. Browsers for LUT Write
3. Navigate to a browser location that has the desired LUT file.
4. Select the LUT file and click Open. The data will be written to the Slot.
NOTE: An error message will be displayed if you select an incompatible 1D or 3D LUT file format for
that Slot type.
Read LUT Procedure To read the LUT data from a Slot, create a LUT file, and save that LUT file to a browser
location, do the following:
1. Click on either the 1D-LUT or 3D-LUT menu name at the top of the screen, and then
select from the drop down menu either Read from Slot A or Read from Slot B.
2. A browser will open, allowing you to navigate to any location the computer can
access ( Figure 12 ).
Figure 12. Browsers for LUT Read
3. Enter a file name in the Save As: or File name: box.
4. Select a LUT file format in the Files of Type: or Save as type: box.
5. Click the Save button. A thermometer bar is displayed reporting the progress of the
Read.
Sample LUT Files Sample LUT files are included with the Mini-Config application and are installed onto
your computer along with the Mini-Config application. These files are accessed
differently, depending on the whether you are using a Mac or PC.
Mac Sample LUT File Access On a Mac, sample LUT files are included in the application package that is installed on the
computer. You need to open this package to access the sample LUT files. They cannot be
accessed directly from the Mac Mini-Config browser.
1. Using the Mac finder, access the installed location of the Mini-Config application. By
default it is installed in the Applications folder.
Mac Windows
Mac Windows