AJA LUT-box - Manual (Page 14)

LUT-box Mini-Converter v2.1r1 www.aja.com 14
2. Right click on the MiniConfig application name and select Show Package Contents.
3. Navigate to the LUT files, located at Contents/Resources/types/lut_box. Two folders are
used, one for 1D-LUTs and the other for 3D-LUTS.
4. Copy the files to another location accessible to your computer and to the LUT-box
Mini-Converter.
5. You will now be able to use MiniConfig to access and write the sample LUT files into
your LUT-Box.
PC Sample LUT File Access On a PC, sample LUT files are installed by default into the Program Files/AJA/MiniConfig/
types/lut_box folder. Two directories are used, one for 1D-LUTs and the other for 3D-LUTS.
These locations are accessible directly from the MiniConfig browser. The sample LUT files
can also be copied to another location accessible by that computer, if desired.
Input Tab Screen
Figure 13. MiniConfig, Input Tab Screen
Input Video Selections Use the Input screen to view and make changes to the converter’s input settings.
Video Source: Selects the input video connectors to use. Choose from the following:
• SDI 1 (Single Link (SL) video, using only the SDI 1 input BNC) (default)
• SDI 1 +2 (Dual Link (DL) video, using both BNCs 1 and 2)
Color Space: Selects the Input Video Color Space. Choose from the following:
• Auto - automatically selects color mode based on the input video parameters and
payload ID (default).
• 422 YCbCr (SL)
• 444 RGB (DL)
• 444 YCbCr (DL).