Sdi output tab screen, Sdi output video selections – AJA LUT-box User Manual
Page 16
LUT-box Mini-Converter v2.1r1
www.aja.com
16
SDI Output Tab
Screen
Figure 15. MiniConfig, SDI Output Tab Screen
SDI Output Video
Selections
Use the SDI Output screen to view and make changes to the converter’s SDI video output
settings.
RGB Range:
Selects the Input Video Color Range. Choose SMPTE (default) or Full color range. Only
applicable if SDI output is 444 RGB format.
PsF Mode:
Selects what mode an incoming PsF signal will have on the SDI output. Choose Psf
(default) or Progressive. Only applicable if SDI input is PsF video, and the SDI output
Pass Through setting is Off.
NOTE:
The LUT-Box HDMI output is always progressive for PsF input video.
Pass Through:
Choose Off or On (default is Off ). When On, LUT processing is bypassed on the SDI
output. This permits the comparison of unprocessed pass through SDI video on the SDI
output alongside LUT processed video displayed on the HDMI output.
3G Mode:
Choose from Auto (default), Level A, or Level B. Auto selects the input 3G format.
NOTE:
The SDI output color space and bit depth always follows the SDI input.