AJA LUT-box - Manual (Page 15)

LUT-box Mini-Converter v2.1r1 www.aja.com 15
RGB Range: Selects the Input Video Color Range. Choose SMPTE (default) or Full color range. Only
applicable if SDI input is 444 RGB format.
Bit Depth: Selects the input video bit depth. Choose from Auto, 8-bit, 10-bit, or 12 bit. Choosing
“Auto” automatically selects the bit depth based on the input video parameters and the
payload ID.
Video Format: Selects the Input Video Format. Choose from Auto, Progressive, Interlaced, or PsF.
Choosing “Auto” automatically selects the format based on the input video parameters
and the payload ID.
HDMI Output Tab
Screen
Figure 14. MiniConfig, HDMI Output Tab Screen
HDMI Output Video
Selections
Use the HDMI Output screen to view and make changes to the converter’s HDMI video
output settings.
RGB Range: Selects the Input Video Color Range. Choose SMPTE or Full color range.
Bit Depth: Selects the input video bit depth. Choose from Auto, 8-bit, 10-bit, or 12 bit. Choosing
“Auto” automatically selects the bit depth based on the input video parameters and the
payload ID.
2K Crop: Select from Off or On. Provides the option of center cutting 2Kx1080 video signals to
make 1920x1080. Default is Off.
HDMI/DVI: Choose Auto, HDMI, or DVI. When DVI is selected, any audio signals present are not
passed. DVI only supports 8-bit video. Choosing “Auto” (default) automatically selects the
output mode based on the attached device's capabilities.