Bang & Olufsen BeoCom 1 - User Guide - Manual (Page 11)

11
Set the time and date
After you have registered the handset, named it and set it up for
use with the telephone lines to which you have access, the display
prompts you to set the time and date. The time is shown when the
phone is not in use and when there is no new information in the
display. Time and date are also shown with Caller ID and Redial
information.
Set clock? is shown
Press to be able to set the clock, or press C if you
wish to skip this step
Turn the wheel to set the hour
Press to store and move to the minutes setting
Complete the setting of the clock
Press to store the time and date
Turn the wheel to set the year and press OK to
store the year
When you have set the time and date…
The display prompts you to register another
handset
If you have additional handsets to register, press
OK. The base is then open for a new five-minute
period, and you can repeat the registration
procedure on the next handset
If you do not have additional handsets, press C
to leave the menu
It is only necessary to set the time
when registering the first handset
to the base. This step in the
registration procedure is skipped
for all subsequent handsets.
Set clock?
OK
Set time
11:20 AM
OK
OK
OK
Register more
handsets?
OK
C